The popularity of CIPP Latex Tubing has skyrocketed in the last couple of years, as companies have begun to build their line of products, and offer them at affordable prices. If you’re thinking of getting a tubing job or getting an upgrade, then you might want to check out CIPP laterals.

One type of CIPP lateral rehabilitation is lining CIPP tubing. Learn more why CIPP laterals must be lined by reading below. 

What Are CIPP Laterals?

When it comes to CIPP tubing, there are two options: You can either go with the original CIPP latex tubing, or you can go with the upgraded version that is made with CIPP (Cyclical Inversion Polymer). Unlike latex, polyester is more durable and long-lasting. It is the primarily why most people end up buying an upgraded CIPP tubing instead of a traditional CIPP tubing. Fiberglass cloth material is usually used in large diameter pipes, which is sturdy and keeps the wet piping secure.

Here are the benefits of using CIPP tubing:

• Durable: First, CIPP tubing has been in the market for over ten years, and it’s known for being durable. With the many different manufacturers of tubing in the US today, it has become much more difficult to get good quality tubing. However, with the CIPP tubing, it’s easy to see why it is better than its competitors, and why it is cheaper than them as well.
• CIPP Has a Warranty: This warranty is in effect for five to ten years. If you have any tubing issues after the warranty period, you can contact the manufacturer and have them replace it for you. There are also some cases where the tubing could break down within this warranty period, but you can still get it replaced.
• Supplier Options: There are several different companies out there that sell CIPP tubing. Some of them offer it for less, while others offer it at an expensive price – it really depends on what brand you want, and which company you choose to buy it from.

Why Should CIPP Laterals Be Lined

Cured-in-place-pipe (CIPP) lining refers to a trenchless rehabilitation and restoration method. It’s used in fixing existing pipes. 

Here’s how CIPP lining is done:

• CIPP lining uses a liquid resin and a textile liner tube. It starts with the wet-out stage, where the textile liner is saturated with an epoxy-based resin mixture, with a pre-determined hardener.
• The pipe liner is then inverted into the pipe using air pressure, for the resin to appear on the outside of the liner, which is against the wall of the existing host pipe.

• Once inversion is finished, a calibration tube is put inside the liner. It’s hot water, ambient, or steam cured. The resin hardens as the curing agent activates it, which creates a smooth, corrosion-resistant, and fitted new pipe wall. 
• A robotic cutting device is then inserted into the newly lined pipe, reinstating any branch line connections.
  

Benefits of Lining CIPP Laterals

Since you already know how CIPP lining works, it’s time to know its benefits. Lining CIPP laterals has plenty of benefits for your plumbing system, including the following: 

Extend the Life of the Pipe

CIPP lining stops soil tunnel corrosion, extending the life of the pipe and overall plumbing system. Soil erosion continues at each lateral connection which can lead to the pipe’s structural failure.

Minimize Sewer Interruptions

The most common defects of lateral sewer include infiltration of roots, rapidly increasing its size. Also, it forms root balls that can block the sewer. It may also lead to unpleasant odors, related damages, and backups. CIPP laterals should be lined to avoid these problems and minimize sewer interruptions.

Cost-effective

The rehabilitation of a pipe usually requires extensive landscaping, affecting your driveway and your yard’s trees and shrubbery. CIPP lining is the preferred choice because no excavation is required, so it’s the most effective means to repair the lateral sewer. Also, it performs far better and costs far less compared to conventional dig-and-replace methods.

Unobtrusive

CIPP lateral lining brings very little disruption to the homeowner’s daily routine. It is because lateral sewer liners are installed from an already existing cleanout inside the building. It eliminates the risk of excavations. In six hours, a lateral building sewer can be brought to life, minimizing water and sewer interruptions to occupants.

Enhanced Performance

Homeowners usually ask whether reducing the diameter of the pipe can be done by installing a pipe in an existing pipe and if it will compromise the sewer lines. The answer is quite the opposite. A CIPP structural liner restores the pipe’s structural integrity. Also, it will improve the pipe’s overall hydraulic characteristics as a result of the CIPP liner’s smooth finish. 

Conclusion

CIPP laterals can be used for many years without requiring messy excavations through the lining. CIPP laterals should be lined because it helps extend the life of pipes, avoids soil erosion, and even enhances the system’s performance. Also, this rehabilitation technique is preferred for lateral sewer because it causes minimal water and sewer interruptions.

Read More:

• 9 Useful Tips For Maintaining Gutters Like a Pro

The job may appear to be nothing more than balancing a rooftop on four walls elegantly for the bystanders, but construction work is a much more intricate business than you can imagine. Workers have to consider the type of soil, terrain, structural challenges, the purpose of construction, model of the city, and various other details before they can start working. And that makes it safe to assume that every task performed at these sites has a well-defined purpose and could be costly in the long term if your plans aren’t taking these variables into account.

Luckily for the construction industry, this is where engineers rise to the occasion and work towards overcoming these challenges. Individuals with expertise in different areas, like civil, electrical, plumbing, and technology, work on refining these plans and add their input to the mix to promise swift action on site. It not only makes the project possible with optimum efficiency but also allows workers to execute things in the safest manner possible. That makes their contribution a necessity for success and indispensable to this industry.

For these reasons, many companies and contractors keep a team of competent engineers to tackle these problems from the start. They feed all this information and go over the plans several times before presenting it to their clients. But, being the client, if you still have your doubts, then you can hire a consultancy firm to help you review all these details. They are a capable group that extends exceptional assistance on all such matters and can subside all your concerns.

Here are some outlines to know more about the role of engineers in the construction industry and where you can use their input. These should help you decide if you can handle the obstacle you face or need outside assistance to get the situation under control.

Civil Engineers

The primary role of civil engineers is to work on the architecture and improve the infrastructure of buildings. They help build systems around the facility to overcome site challenges regarding utilities and ensure that it is feasible.

The broad spectrum of expertise they possess grants them the authority to develop construction plans from scratch and oversee their execution as they see fit. They take charge in such situations and collaborate with manual labor and other engineers looking after the technical processes related to the project. It highlights that this role demands a certain degree of leadership and dealing with the documentation.

Energy Engineers

The clients who hire contractors for jobs expect them to integrate their newly constructed buildings with environment-friendly, energy-efficient features. It is where energy engineers step into the light and propose methods other than conventional ones to generate power for buildings. They use alternative energy sources, like solar energy, in their plans to meet these demands.

It not only makes the building energy-efficient but also cuts down on the growing utility costs. That, in turn, increases the value of the construction, making it a coveted project.

Plumbing Engineers

Every building has several utility needs in their designs to ensure that the occupants can use it adequately, and plumbing is one of those. These go beyond addressing the concerns about your toilet pots and sinks and deal with matters related to the building’s piping system.

Plumbing engineers work on rooftop drainage, water heating systems, water softening systems, fire protection, storm piping, garden sprinklers, etc. It makes their contribution vital for the construction project and requires them to collaborate with project heads to devise the best possible ways of implementing these designs. 

Mechanical Engineers

Other utility challenges faced during these construction projects are regarding the heating and ventilation of buildings. These HVAC systems are part of mechanical engineers’ job, who put them in place earlier in the designs to ensure the safety of residents. They also contribute to elevating the quality of expense on its energy requirements.

Without them, the residents are at the risk of breathing in harmful pollutants and contract severe illnesses or mutations. Besides, the State Board of Health can also find the building without a proper ventilation system. That makes it not a matter of choice, but an obligation for contractors to consider it.

Structural Engineers

The job of structural engineers might seem elementary because anyone with a basic understanding of construction work can point out where to install the beam, trusses, and footers, but that isn’t the case. Structural engineers do more than just strengthening the foundations. They work with engineers to provide pathways for people and the systems that make a building adequate for its occupants. They also leave room or reserve plans for future expansion of the construction, like adding a structure, for the times when they have enough funds to execute these ideas. That makes them an equally vital part of the team. 

Electrical & Technological Engineers

Although these are two different engineering types, their roles in the construction business overlap with each other. The job of electrical engineers is to look after the building’s power requirements and make sure that there are measures in place to avoid any hazards. They also need to ensure that the distribution is efficient, and the system can bear the load to keep these accidents from happening.

On the other hand, technological engineers look after the responsibilities of IT infrastructure and the building’s digital security. They make sure that all these provisions are easily accessible, and for that, work hand in hand with the electrical engineers and interior designers. That makes their job well-defined and distinguishes it from the role of typical electrical engineers working at a construction site.

Summary

These are different areas of focus that outline engineers’ role in the construction industry and highlight the importance of their contribution. If you are ever looking to hire someone for such a project, make sure that you are vigilant about asking questions regarding their plans on these subjects. Consider outsourcing the job if you feel the need to take things off your plate, but still want to ensure your investment’s best results.

Discover More

• Understand the Different Types of Wood Floors Available
• An Introductory Guide to Fire Safety Engineering for Architects
• How to Take Care of Your Driveway?
• The Importance of Land Surveyors in Civil Engineering
• Pedram Zohrevand Talks About the Civil Engineering Skills You Need To Develop As An Engineer